Mike Taro's Light & Sound Centre | |HOME
|
|||
W Audio PSR-15 Speaker £400 A PAIR
W Audio PSR-12 Speaker
They Look And Sound Great Nothing To Touch Them At This Price
|
|||
|
|
|
|
|
|||
Product Information
W-Audio sets new standards in passive loudspeakers for audio musicians, DJ's and any audio professional looking for a compact quality solution to the world's oldest audio problem; accurate reproduction. The PSR series offers superior sound and has features that until now have only been found on more expensive professional equipment. Design and build quality is not limited to the audio performance. Safe and easy installation is guaranteed by multiple rigging points and functional casing design gives true multifunction capability without compromise. The PSR Range feature VariFlare; a rotational top end horn flare. This unique feature allows an installer or audio specialist to really tailor the HF dispersion to the situation needed making the PSR range ideal as a foldback monitor or horizontal installation cabinet. Built to last the W-Audio passive electronics contain custom filter circuitry designed to optimize the box's sonic performance and help protect the driver components. With quality high powered components, advanced electronics and sturdy box design, the PSR series will outlast even the toughest user environments yet still deliver first class audio reproduction plus all speakers come with a fabulous padded transit covers.
Features:
High Impact Molded Polypropylene Enclosure
1.75" Voice Coil, 1 inch Exit Titanium Compression Driver
5 Integral Suspension Points
Complete Mounting Solutions
Smooth Response With High Power Handling Capacity
80 x 60 degree Coverage Pattern
Freq. Range (-10dB): 40Hz - 20kHz
Max Calculated SPL: 129.5dB
Rated System Power: 350W RMS
True Rating
Continuous 1400W Peak
Crossover Frequency: 1.7kHz
Nominal Impedance: 8 Ohms
Connector: 2 x NL4 Speakon
Horizontal Coverage: 80 degrees
Vertical Coverage: 60 degrees
Specification:
Dimensions: 740mm x 475mm x 400mm
Weight: 25Kg
|
|||
VX series - 12" & 15" polycarbonate speaker systems
For any Band or disco wanting a quality speaker this is it, they really do kick !!!
The VX series is a range of premium quality speaker systems that have been designed specifically for the discerning DJ and performing musician.
Inside the sturdy and stylish polycarbonate moulded cabinet, you'll find superb quality, professional spec components. There are three models and you can choose either 4 or 8 ohm, so there's a version to suit your application and your amplifier.
The cabinets are fitted with a tough, acoustically transparent, steel grille, and are supplied in quality, padded zipped full covers that help protect you speakers from the weather but also the odd knock.
Both the VX12 and VX15 have a 90x40 degree horn flare, powered by a compression driver with a 1" throat and 2" titanium diaghragm. All bass speakers have a strong, cast aluminium chassis with a heavy-duty edge wound voice coil, mounted on a kapton former.
The VX range is ideal for a host of applications. Their compact size, rugged build and superb performance make them perfect for live acts, solo entertainers, bands, karaoke and dj applications. The clever asymmetrical cabinet shape and design means they are excellent stage monitors too. All in all, a speaker system that will help you transform your performance from good to exceptional!
For more information and images, please use these links. All images and documents will open in a new window.
VX series - 12" & 15" polycarbonate speaker systems
The range consists of the following models :
VX12 12" full range - 450 Watts power handling
VX15 15" full range - 600 Watts power handling
VX15sub 15" sub bass - 600 Watts power handling
Deltec
'More sound for your pound'
Deltec have been manufactures and suppliers of audio and related products to the trade for over twenty-five years. Amplifiers, disco consuls, lighting effects, speaker boxes, custom built P.A. rigs and so on.
When we sat down to approach specifying our current range, we realised that while our backgrounds were based in electronic engineering we have in excess of sixty years speaker building and using experience between us. It was at this point we realised we were in a unique position to use this experience to design an exceptional product based around standard components, whilst adopting a no compromise attitude with regards to component selection, quality of performance and manufacture, and delivering excellent value for money.
In fact our catchphrase was initially a flippant in-house comment, but became more and more relevant as the research and development process proceeded. Components, filters, cabinet designs, drivers and so on being accepted or rejected on the basis of the phrase that sums up both our approach and our product.
Does it give 'More sound for your pound'.
CX SeriesFEATURES:- Low visual impact styling, enhanced by units being available in either black or white textured enamel finish, allowing for over painting to match existing decor.
|
SX Series A compact and rugged unit for all sound reinforcement requirements, the use of a co-axial main driver, enhances midrange performance and vocal presence.
|
GX Series Most babies make a noise out of all proportion to their size, this baby is no exception, engineered to provide maximum sonic performance in a minimal package, for applications where space is at a premium.
|
BX Series A dedicated bass unit of moderate size, utilising the same extended excursion 15" driver as the GX15 in an optimised enclosure. Its 'footprint' is the same size as the SX5 or GX15 allowing stacking, or utilising the incorporated tube socket a satellite system can be configured from any selection in our range.
|
Contractors Series
FEATURES:- Low visual impact styling, enhanced by units being available in either black or white textured enamel finish, allowing for over painting to match existing decor. All wall mounting units have rear bracket fixings as standard in addition the CX1 has flying points at each end to facilitate maximum flexibility of installation. In common with our existing range of mobile P.A. speakers all main drivers have been selected from the EMINENCE U.S.A. catalogue. All audio filters use ferrite cored inductors, fibreglass pcb board, polycarbonate capacitors, and ceramic attenuator resistors in keeping with the quality of construction and execution of these designs, and to uphold our reputation for providing products of superlative performance and reliability. All unit are fitted with 2 x Speakons.
CX1
A 250w rms full range speaker built around a heavy duty 8" co-axial driver allowing truly remarkable performance from a speaker of this size.
Rated power watts - RMS:
|
250
|
Size (mm) H x D x W:
|
304 x 247 x 202
|
Normal impedance:
|
8 ohms
|
Weight:
|
7.25Kg
|
Terminations:
|
2 x Speakons
|
|
|
|
|
|
|
CX10
A 2-way install version of our GX10 a proven performer from our mobile P.A. range, packaged to conform to the requirements of this format.
Rated power watts - RMS:
|
500
|
Size (mm) H x D x W:
|
514 x 300 x 301
|
Normal impedance:
|
8 ohms
|
Weight:
|
20.00Kg
|
Terminations:
|
2 x Speakons
|
|
|
|
|
|
|
SX Series
A compact and rugged unit for all sound reinforcement requirements, the use of a co-axial main driver, enhances midrange performance and vocal presence.
SX 2
Rated power watts - RMS
|
225
|
Loading
|
Bass reflex
|
SPL
|
99dB
|
Handles
|
9" Strap
|
Frequencies covered
|
Full audio spectrum
|
Stand Socket
|
35mm
|
Normal impedance
|
8 ohms
|
Size (mm) H x D x W
|
529 x 308 x 384
|
Terminations
|
2 x 1/4" Jacks
|
Weight
|
14Kg
|
LF Driver
|
Beta - 12LT 2" voice coil
38oz magnet
|
|
|
HF Driver
|
Motorola 100w solid state (Piezo) horn KSN 1001
|
|
|
SX 3
Rated power watts - RMS
|
400
|
Loading
|
Bass reflex
|
SPL
|
100dB
|
Handles
|
9" Strap
|
Frequencies covered
|
Full audio spectrum
|
Stand Socket
|
35mm
|
Normal impedance
|
8 ohms
|
Size (mm) H x D x W
|
591 x 308 x 384
|
Terminations
|
2 x 1/4" Jacks
|
Weight
|
18Kg
|
LF Driver
|
Delta - 12. 2.5" voice coil
56 oz magnet
|
|
|
HF Driver
|
Electro magnetic driver utilising replacement 1" titanium diaphragm, and integral horn flare
|
|
|
SX Series
For those users who require the enhanced sound projection and bass response of a 15" driver, this 3 way model has proved an extremely popular and cost effective solution.
SX5 MkII £495.00
FOR THOSE THAT PREFER A WOOD CABINET THIS IS FOR YOU, THE ONLY THING BETTER THAN THIS IS ITS MORE POWERFUL BROTHER THE GX15
Rated power watts - RMS
|
400
|
Loading
|
Bass reflex
|
SPL
|
101dB
|
Handles
|
Metal bar
|
Frequencies covered
|
Full audio spectrum
|
Stand Socket
|
Heavy duty 35mm
|
Normal impedance
|
8 ohms
|
Size (mm) H x D x W
|
730 x 410 x 472
|
Terminations
|
2 x 1/4" Jacks
|
Weight
|
26.5Kg
|
LF Driver
|
Delta - 15. 2.5" voice coil
56 oz magnet
|
|
|
HF Driver
|
HF Driver (1) Electro magnetic driver utilising replacement 1" phenolic diaphragm, and large inteegral horn flare.
|
HF Driver (2) Motorola 100w solid state (Piezo) horn KSN 1001
|
|